As of
基礎 ｜ 砥石摩耗のインプロセス補償 ｜ 砥石作業面面性状の測定
- 古谷克司、加藤知尚、毛利尚武：動圧を利用した湿式研削における砥石磨耗のインプロセス測定（第１報）−測定原理−、精密工学会誌、66、1、pp.
127-131 (2000)
- Katsushi Furutani, Tomonao Katoh, Naotake Mohri:
In-process Measurement of Wear of Grinding Wheel by Hydrodynamic Pressure, Proceedings of
14th Annual Meeting of American Society for Precision Engineering, Monterey, California,
USA, pp. 159-162 (1999)
- 古谷克司、加藤知尚、毛利尚武：研削液により発生する動圧を利用した砥石摩耗のインプロセス測定、日本機械学会1999年度年次大会講演論文集、東京都港区、V、pp.
43-44 (1999)
- 加藤知尚, 古谷克司, 大塚二郎, 毛利尚武:
動圧を利用した研削砥石のインプロセス計測(第2報)実機を用いた検討,
1999年度精密工学会春季大会学術講演会講演論文集, 東京都文京区,
p. 647 (1999)
- 加藤知尚, 古谷克司, 大塚二郎, 毛利尚武:
動圧を利用した研削砥石のインプロセス計測（第1報）−原理と基礎実験−,
1998年度精密工学会秋季大会学術講演会講演論文集, 札幌市北区, p.
331 (1998)
topへ
- Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura:
Pressure-based in-process measurement by the null method for automatic
compensation of wheel wear during surface grinding, Proceedings of the
Institution of Mechanical Engineers Part B; Journal of Engineering Manufacture,
217, B2, pp. 153-159 (2003)
- Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura:
Automatic compensation for grinding wheel wear by pressure based-in process
measurement in wet grinding, Precision Engineering, 27, 1, pp. 9-13 (2003)
- Katsushi Furutani, Nguyen Trong Hieu, Noriyuki
Ohguro, Takashi Nakamura: In-process Compensation for Grinding Wheel Wear Based on Pressure Measurement by Zero Method,
Proceedings of 6th International Conference on Mechatronics Technology,
Kitakyushu, Japan, pp. 58-63 (2002)
- Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro,
Takashi Nakamura: Automatic Compensation for Wear of Grinding Wheel by Pressure Based
In-process Measurement in Wet Grinding, Proceedings of 2002 Japan-USA Symposium on
Flexible Automation, Hiroshima, Japan, 1, pp. 453-458 (2002)
- 古谷克司、Nguyen Trong Hieu、大黒徳之、中村隆：零位法の適用による動圧を利用した砥石磨耗のインプロセス補償、日本機械学会・ロボティクス・メカトロニクス講演会'02講演論文集、島根県松江市、pp.
2A1-J04(1)-2A1-J04(2) (2002).
- Nguyen Trong Hieu, Katsushi Furutani, Noriyuki
Ohguro, Takashi Nakamura: In-process
Measurement of Grinding Wheel by Hydrodynamic Pressure (4th Report) - Automating
Compensation Process for Grinding Wheel Wear -、2002年度精密工学会春季大会学術講演会講演論文集、東京都目黒区、p.
339 (2002).
- Nguyen Trong Hieu, Katsushi Furutani, Noriyuki
Ohguro: Compensation for Grinding Wheel
Wear by Pressure Based In-process Measurement in Wet Grinding, 日本機械学会第3回生産加工・工作機械部門講演会講演論文集、神奈川県三浦郡葉山町、pp.
275-276 (2001)
topへ
- Katsushi Furutani, Noriyuki Ohguro, Nguyen Trong Hieu, Takashi Nakamura:
In-process measurement of topography change of grinding wheel by using
hydrodynamic pressure, International Journal of Machine Tools and Manufacture,
42, 13, pp. 1447-1453 (2002).
- Katsushi Furutani, Noriyuki Ohguro, Nguyen Trong Hieu, Takashi Nakamura:
In-process Measurement of Topography of Grinding Wheel by Using Hydrodynamic Pressure,
Proceedings of 17th Annual Meeting of American Society for Precision Engineering,
St. Louis, Missouri, USA, pp. 332-337 (2002)
- 大黒徳之、古谷克司、太田勝、Nguyen Trong Hieu：動圧を利用した研削砥石のインプロセス計測(第3報)砥石作業面性状の変化の検出、
2001年度精密工学会春季大会学術講演会講演論文集、東京都八王子市、p.
301 (2001).
topへ
論文リストのトップページへ
by Katsushi
Furutani