Citation Report

As of

Paper

Katsushi Furutani, Hideaki Maeda: Machining a glass rod with a lathe-type electro-chemical discharge machine, Journal of Micromechanics and Microengineering, 18, 6, 065006, pp. 1-8 (2008)

Number of citation: 15

  1. A. Torabi, M. R. Razfar: The capability of ECDM in creating effective microchannel on the PDMS, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 68, pp. 10-19, MAR 2020.
  2. V. Rajput, M. Goud, N. M. Suri: Review-Electrochemical Discharge Machining: Gas Film Electrochemical Aspects, Stability Parameters, and Research Work, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 168, 1, 013503, JAN 1 2020.
  3. S. Kumar, A. Dvivedi: Development of material removal rate model and performance evaluation of ultrasonic turning process, MATERIALS AND MANUFACTURING PROCESSES, 35, 14, pp. 1598-1611, OCT 25 2020.
  4. N. Kumar, N. Mandal, A. K. Das: Micro-machining through electrochemical discharge processes: a review, MATERIALS AND MANUFACTURING PROCESSES, 35, 4, pp. 363-404, MAR 11 2020
  5. Y. Liu, C. Zhang, S. Li et al.: Experimental Study of Micro Electrochemical Discharge Machining of Ultra-Clear Glass with a Rotating Helical Tool, PROCESSES, 7, 4, 195, APR 2019
  6. A. Nouhi, J. K. Spelt, M. Papini: Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 53, pp. 151-162, JUL 2018
  7. Nasim Sabahi, Mansour Hajian, Mohammad Reza Razfar: Experimental study on the heat-affected zone of glass substrate machined by electrochemical discharge machining (ECDM) process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 97, 1-4, pp. 1557-1564, JUL 2018
  8. Hajian, Mansour; Razfar, Mohammad Reza; Movahed, Saeid; et al.: Experimental and numerical investigations of machining depth for glass material in electrochemical discharge milling, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 51, pp. 521-528, JAN 2018
  9. Sabahi, Nasim; Razfar, Mohammad Reza; Hajian, Mansour: Experimental investigation of surfactant-mixed electrolyte into electrochemical discharge machining (ECDM) process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 250, pp. 190-202, DEC 2017
  10. Mansour Hajian, Mohammad Reza Razfar, Saeid Movahed: An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass, PRECISION ENGINEERING, 45, pp. 322-331, JUL 2016
  11. A. Nouhi, K. Kowsari, J. K. Spelt et al.: Abrasive jet machining of channels on highly-curved glass and PMMA surfaces, WEAR, 356-357, pp, 30-39, JUN 2016
  12. Tarlochan Singh, Akshay Dvivedi: Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 105, pp. 1-13, JUN 2016
  13. Behroozfar, Ali; Razfar, Mohammad Reza: Experimental Study of the Tool Wear During the Electrochemical Discharge Machining, MATERIALS AND MANUFACTURING PROCESSES, 31, 5, pp. 574-580, APR 3 2016.
  14. Chavoshi, Saeed Zare; Luo, Xichun: Hybrid micro-machining processes: A review, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 41, pp. 1-23, JUL 2015.
  15. Yasuhiro Mochimaru, Minoru Ota, Keishi Yamaguchi: Micro Hole Processing Using Electro-Chemical Discharge Machining, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 6, 6, SI, pp. 949-957, 2012

Go back to paper list

by Katsushi Furutani