Citation Report

As of

Paper

Furutani K, Saneto A, Takezawa H, Mohri N, Miyake H, Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 25 (2): 138-144 APR 2001

Number of citation: 96

  1. V. T. Le: The role of electrical parameters in adding powder influences the surface properties of SKD61 steel in EDM process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 43, 3, 120, MAR 2021.
  2. Md. Al-Amin, A. M. Abdul-Rani, M. Danish et al.: Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 66, 531-549, NOV 2020.
  3. Y. T. Yu, S. F. Hsieh, M. H. Lin et al.: Improvement in Ca and P incorporation in the coating on Ti by gas-assisted electrical discharge coating, SURFACE & COATINGS TECHNOLOGY, 400, 126120, OCT 25 2020.
  4. V. T. Le, T. L. Banh, X. T. Tran et al.: Studying the microhardness on the surface of SKD61 in PMEDM using tungsten carbide powder, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 34, 22-24, SI, 2040164, SEP 30 2020.
  5. E. Oguz, C. Can, U. Ibrahim et al.: Thermo-fluid multi-physics modeling and experimental verification of volumetric workpiece material removal by a discharge pulse in electric discharge machining process, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 53, 39, 395501, SEP 23 2020.
  6. G. Singh, T. R. Ablyaz, E. S. Shlykov et al.: Enhancing Corrosion and Wear Resistance of Ti6Al4V Alloy Using CNTs Mixed Electro-Discharge Process, MICROMACHINES, 11, 9, 850, SEP 2020.
  7. A. Abdudeen, O. J. E. Abu, A. Kareem et al.: Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM, MICROMACHINES, 11, 8, 754, AUG 2020.
  8. Md. Al-Amin, A. M. A. Rani, A. A. A. Aliyu et al.: Powder mixed-EDM for potential biomedical applications: A critical review, MATERIALS AND MANUFACTURING PROCESSES, 35, 16, pp. 1789-1811, DEC 9 2020.
  9. Q. J. E. Abu, A. Zaiout, A. H. I. Mourad et al.: Principles and Characteristics of Different EDM Processes in Machining Tool and Die Steels, APPLIED SCIENCES-BASEL, 10, 6, 2082, MAR 2020
  10. S. Avinash, K. Chetti, M. Haribaskar et al.: Influence of Discharge Energy on Electrical Discharge Machining of Ti-Foam Material, Lecture Notes on Multidisciplinary Industrial Engineering, ADVANCES IN UNCONVENTIONAL MACHINING AND COMPOSITES, AIMTDR 2018, pp. 537-547, 2020
  11. S. Jeavudeen, H. S. Jailani, M. Murugan; Effect of process parameters in the machining of Titanium alloy and high speed steel in powder mixed electrical discharge machining process, MATERIALS TODAY-PROCEEDINGS, 27, 1, pp. 615-619, 2020.
  12. S. Sundriyal, Vipin, R. S. Walia: Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 66, 4, pp. 243-253, 2020.
  13. J. Lei, X. Wu, Z. Wang et al.: Electrical discharge machining of micro grooves using laminated disc electrodes made of Cu and Sn foils, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271, pp. 455-462, SEP 2019
  14. I. Arun, C. Yuvaraj, P. Selvarani et al.: Synthesis of electrical discharge metal matrix composite coating through compacted semi-sintered electrode and its tribological studies, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 41, 5, UNSP 213, MAY 2019
  15. C. Prakash, S. Singh, C. I. Pruncu et al.: Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode, MATERIALS, 12, 7, 1006, APR 10 2019
  16. Santosh Kumar Sahu, Saurav Datta: Experimental studies on graphite powder-mixed electro-discharge machining of Inconel 718 super alloys: Comparison with conventional electro-discharge machining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 233, 2, pp. 384-402, APR 2019
  17. Wen Wu, Xiao-Yu Wu, Jian-Guo Lei et al.: Fabrication of deep-narrow microgrooves by micro-EDM using rotary dentate disc foil electrodes in emulsion, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 29, 3, 035014, MAR 2019
  18. Toan Duc Nguyen, Phan Huu Nguyen, Long Tien Banh: Die steel surface layer quality improvement in titanium -powder mixed die sinking electrical discharge machining, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100, 9-12, pp. 2637-2651, FEB 2019
  19. Abhinav Shard, Deep Shikha, Vishal Gupta et al.: Effect of B4C abrasive mixed into dielectric fluid on electrical discharge machining, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 40, 12, UNSP 554, DEC 2018
  20. D. Tijo,Shilpi Kumari, Manoj Masanta: Ceramic-metal Composite Coating on Steel Using a Powder Compact Tool Electrode by the Electro-Discharge Coating Process, SILICON, 10, 4, pp. 1625-1637, JUL 2018
  21. Santosh Kumar Sahu, Thrinadh Jadam, Saurav Datta et al.: Effect of using SiC powder-added dielectric media during electro-discharge machining of Inconel 718 superalloys, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 40, 7, UNSP 330, JUL 2018
  22. S. A. Mullya, G. Karthikeyan: Accretion behavior and debris flow along interelectrode gap in mu ED-milling process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 96, 9-12, pp. 4381-4392, JUN 2018
  23. Sanjeev Kumar: Deposition of Carbon on the Surface of OHNS Die Steel by Electrical Discharge Machining Process, Advances in Transdisciplinary Engineering, 8, ADVANCES IN MANUFACTURING TECHNOLOGY XXXII, pp. 86-91, SEP 2018
  24. Opoz, Tahsin T.; Yasar, Hamidullah; Ekmekci, Nihal; et al.: Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining, JOURNAL OF MANUFACTURING PROCESSES, 31, pp.744-758, JAN 2018
  25. Chakraborty, Sujoy; Kar, Siddhartha; Dey, Vidyut; et al.: THE PHENOMENON OF SURFACE MODIFICATION BY ELECTRO-DISCHARGE COATING PROCESS: A REVIEW, SURFACE REVIEW AND LETTERS, 25, 1, 1830003, JAN 2018
  26. Talla, Gangadharudu; Gangopadhayay, S.; Biswas, C. K.: State of the art in powder-mixed electric discharge machining: A review, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 231, 14, SI, pp. 2511-2526, DEC 2017
  27. Tijo, D.; Masanta, Manoj: Mechanical performance of in-situ TiC-TiB2 composite coating deposited on Ti-6A1-4V alloy by powder suspension electro-discharge coating process, SURFACE & COATINGS TECHNOLOGY, 328, pp. 192-203, NOV 15 2017
  28. Tijo, D.; Kumari, Shilpi; Masanta, Manoj: Hard and wear resistance TiC-composite coating on AISI 1020 steel using powder metallurgy tool by electro-discharge coating process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 39, 11, pp. 4719-4734, NOV 2017
  29. Prakash, Chander; Uddin, M. S.: Surface modification of beta-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity, SURFACE & COATINGS TECHNOLOGY, 326 A, pp. 134-145, OCT 15 2017
  30. Kumar, Sanjeev; Singh, Rupinder; Batish, Ajay; et al.: Multi-objective parametric optimization using the Grey-Taguchi approach for powder mixed electric discharge machining of grade-II titanium alloy with cryogenically treated electrodes, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 24, 5, pp. 339-350, OCT 2017
  31. Amorim, Fred L.; Dalcin, Vitor A.; Soares, Paulo; et al.: Surface modification of tool steel by electrical discharge machining with molybdenum powder mixed in dielectric fluid, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 91, 1-4, pp. 341-350, JUL 2017
  32. Shinde, R.; Patil, N.; Raut, D.; et al.: Experimental Investigations into Powder-Mixed Electrical Discharge Machining (PMEDM) of HCHCr D2 Die Steel, Advances in Intelligent Systems Research, 137, pp. 298-303, 2017
  33. Tripathy, S.; Tripathy, D. K.: An approach for increasing the micro-hardness in electrical discharge machining by adding conductive powder to the dielectric, MATERIALS TODAY-PROCEEDINGS, 4 A, 2, pp. 1215-1224, 2017
  34. Sujoy Chakraborty, Siddhartha Kar, Vidyut Dey, et al.: OPTIMIZATION AND SURFACE MODIFICATION OF Al-6351 ALLOY USING SiC-Cu GREEN COMPACT ELECTRODE BY ELECTRO DISCHARGE COATING PROCESS, SURFACE REVIEW AND LETTERS, 24, 1, 1750007, JAN 2017
  35. W. F. Sales, A. R. F. Oliveira, A. A. Raslan: Titanium perovskite (CaTiO3) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications, SURFACE & COATINGS TECHNOLOGY, 307, pp. 1011-1015, Pt. A, DEC 15 2016
  36. Banh Tien Long, Nguyen Huu Phan, Ngo Cuong et al.: Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi's method, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 87, 5-8, pp. 1929-1939, NOV 2016
  37. Mohammad Reza Shabgard, Ahad Gholipoor, Hamid Baseri: A review on recent developments in machining methods based on electrical discharge phenomena, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 87, 5-8, pp. 2081-2097, NOV 2016
  38. Houriyeh Marashi, Davoud M. Jafarlou, Ahmed A. D. Sarhan, et al.: State of the art in powder mixed dielectric for EDM applications, PRECISION ENGINEERING, 46, pp. 11-33, OCT 2016
  39. Jagdeep Singh, Rajiv Kumar Sharma: Study the surface modification and characterization for powder mixed electrical discharge machining of tungsten carbide, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 23, 5, pp. 321-335, OCT 2016
  40. Z. J. Xie, Y. J. Mai, W. Q. Lian et al.: Titanium carbide coating with enhanced tribological properties obtained by EDC using partially sintered titanium electrodes and graphite powder mixed dielectric, SURFACE & COATINGS TECHNOLOGY, 300, pp. 50-57, AUG 25 2016
  41. Bulent Ekmekci, Hamidullah Yasar, Nihal Ekmekci: A Discharge Separation Model for Powder Mixed Electrical Discharge Machining, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 138, 8, 081006, AUG 2016
  42. Afzaal Ahmed: Deposition and Analysis of Composite Coating on Aluminum Using Ti-B4C Powder Metallurgy Tools in EDM, MATERIALS AND MANUFACTURING PROCESSES, 31, 4, pp. 467-474, MAR 2016
  43. Chander Prakash, Harmesh K. Kansal, B. S. Pabla, et al.: Electric discharge machining - A potential choice for surface modification of metallic implants for orthopedic applications: A review, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 230, 2, pp. 331-353, FEB 2016
  44. Oguz Erdem, Can Cogun, Levent Urtekin et al.: The effect of powder mixed and heated dielectric on drilling performance of electric discharge machining (EDM), JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 31, 3, pp. 531-544, 2016
  45. A. Muttamara, J. Mesee: Effect of TiN powder mixed in Electrical Discharge Machining, Proceedings of 2nd International Conference on Mechanical Engineering and Automation Science (ICMEAS), Singapore, OCT 13-15, 2016, IOP Conference Series-Materials Science and Engineering, 157, 012021, 2016
  46. Molinetti, Anderson; Amorim, Fred L.; Soares, Paulo Cesar, Jr.; et al.: Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 83, 5-8, pp. 1057-1068, MAR 2016.
  47. Marashi, Houriyeh; Sarhan, Ahmed A. D.; Hamdi, Mohd: Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel, APPLIED SURFACE SCIENCE A, 357, pp. 892-907, DEC 1 2015.
  48. Unses, Emre; Cogun, Can: Improvement of Electric Discharge Machining (EDM) Performance of Ti-6Al-4V Alloy with Added Graphite Powder to Dielectric, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 61, 6, pp. 409-418, JUN 2015.
  49. Chakraborty, S.; Dey, V.; Ghosh, S. K.: A review on the use of dielectric fluids and their effects in electrical discharge machining characteristics, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 40, pp. 1-6, APR 2015.
  50. Ekmekci, Bulent; Ulusoz, Fevzi; Ekmekci, Nihal; et al.: Suspended SiC particle deposition on plastic mold steel surfaces in powder-mixed electrical discharge machining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 229, 3, pp. 475-486, MAR 2015
  51. Rajesh Bajaj, Arun Kumar Tiwari, Amit Rai Dixit: Current trends in electric discharge machining using micro and nano powder materials- A Review, MATERIALS TODAY-PROCEEDINGS, 2, 4-5, pp. 3302-3307, 2015
  52. Zain, Zakaria Mohd; Ndaliman, Mohammed Baba; Khan, Ahsan Ali; et al.: Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 228, 18, pp. 3374-3380, DEC 2014
  53. Sanjeev Kumar: SIMULTANEOUS IMPROVEMENT OF MICRO-HARDNESS AND SURFACE FINISH IN DIE STEELS BY POWDER-MIXED EDM PROCESS, Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, CANADA, 2B, V02BT02A021, NOV 2014
  54. Arun, Ilangovan; Vaishnavi, P.; Duraiselvam, Muthukannan; et al.: Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 105, 6, pp. 544-551, JUN 2014
  55. Chen, Hsin-Jen; Wu, Kun-Ling; Yan, Biing-Hwa: Characteristics of Al alloy surface after EDC with sintered Ti electrode and TiN powder additive, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 72, 1-4, pp. 319-332, APR 2014
  56. Yasar, Hamidullah; Ekmekci, Bulent: Ti-6Al-4V Surfaces in SiC Powder Mixed Electrical Discharge Machining, 2nd International Conference on Material Science and Engineering Technology (ICMSET 2013), London, ENGLAND, NOV 16-17, 2013, Advanced Materials Research, MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY II, 856, pp. 226-230, 2014
  57. Suzuki, Tsunehisa; Kobayashi, Seiya: Mechanisms of TiC layer formation on high speed steel by a single pulse in electrical discharge machining, 18th World Interfinish Congress, Politecnico Milano, Milan, ITALY, NOV 14-16, 2012, ELECTROCHIMICA ACTA, 114, pp. 844-850, DEC 30 2013
  58. Li, Guoliang; Jie, Xiaohua; Luo, Wen: Preparation of (Ti, Al)C ceramic coating on carbon steel by electrical discharge coating and its properties research, International Conference on Materials Science and Nanotechnology (ICMSN 2012), Guangzhou, PEOPLES R CHINA, NOV 16-18, 2012, Key Engineering Materials, MATERIALS SCIENCE AND NANOTECHNOLOGY I, 531-532, pp. 108-113, 2013
  59. Jahan M. P., Rahman, M., Wong, Y. S.: Study of the Diffusion of Carbon, Its Sources, and Effect on Finishing Micro-EDM Performance of Cemented Carbide, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 21, 8, pp. 1655-1668, DOI: 10.1007/s11665-011-0083-1, AUG 2012.
  60. Pichai Janmanee, Apiwat Muttamara: Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension, APPLIED SURFACE SCIENCE, 258, 19, pp. 7255-7265, JUL 2012
  61. Murray J., Zdebski D., Clare A. T.: Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 212, 7, pp. 1537-1547, DOI: 10.1016/j.jmatprotec.2012.02.019, JUL 2012.
  62. Anirban Bhattacharya, Ajay Batish: Effect of process variables on microhardness, grain size and strain during machining of various die steels with powder-mixed electric-discharge machining using dummy treated experimental design, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226, B7, pp. 1192-1204, JUL 2012
  63. Padhee S., Nayak N., Panda S. K. et al.: Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 37, 2, pp. 223-240, DOI: 10.1007/s12046-012-0078-0, APR 2012.
  64. Singh S., Yeh M. F.: Optimization of Abrasive Powder Mixed EDM of Aluminum Matrix Composites with Multiple Responses Using Gray Relational Analysis, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 21, 4, pp. 481-491, DOI: 10.1007/s11665-011-9861-z, APR 2012.
  65. Bhattacharya A., Batish A., Singh G.: Optimization of powder mixed electric discharge machining using dummy treated experimental design with analytic hierarchy process, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226, B1, pp. 103-116, DOI: 10.1177/0954405411402876, JAN 2012.
  66. Li Guoliang, Jie Xiaohua, He Ling: High Temperature Oxidation Behavior of (Ti, Al) C Ceramic Coatings on Carbon Steel Prepared by Electrical Discharge Coating in Kerosene, Advanced Materials Research (MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2nd International Conference on Manufacturing Science and Engineering, Guilin, CHINA), 189-193, pp. 186-192, DOI: 10.4028/www.scientific.net/AMR.189-193.186, APR. 2011
  67. Zhang Yanzhen, Liu Yonghong, Ji Renjie et al.: Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric, APPLIED SURFACE SCIENCE, 257, 14, pp. 5989-5997, DOI: 10.1016/j.apsusc.2011.01.083, MAR. 2011.
  68. Hu Fuqiang, Song B. Y., Guo Y. F. et al.: Study on Powder Mixed EDM of an Aluminium Matrix Composite, Advanced Materials Research (ENVIRONMENTAL BIOTECHNOLOGY AND MATERIALS ENGINEERING, PTS 1-3, International Conference on Environmental Biotechnology and Materials Engineering, Harbin, CHINA), 183-185, pp. 1947-1951, DOI: 10.4028/www.scientific.net/AMR.183-185.1947, MAR. 2011.
  69. Patowari P. K., Mishra U. K., Saha P. et al.: Surface Integrity of C-40 Steel Processed with WC-Cu Powder Metallurgy Green Compact Tools in EDM, MATERIALS AND MANUFACTURING PROCESSES, 26, 5, pp. 668-676, DOI: 10.1080/10426914.2010.512652, 2011.
  70. Kumar H, Davim JP: Role of Powder in the Machining of Al-10% Sic(p) Metal Matrix Composites by Powder Mixed Electric Discharge Machining, JOURNAL OF COMPOSITE MATERIALS, 45, 2, pp. 133-151, JAN 2011.
  71. Kumar A, Maheshwari S, Sharma C, et al.: Research Developments in Additives Mixed Electrical Discharge Machining (AEDM): A State of Art Review, MATERIALS AND MANUFACTURING PROCESSES, 25, 10, pp. 1166-1180, 2010.
  72. Garg RK, Singh KK, Sachdeva A, et al.: Review of research work in sinking EDM and WEDM on metal matrix composite materials, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 50, 5-8, pp. 611-624, SEP 2010.
  73. Kumar S, Singh R: Investigating surface properties of OHNS die steel after electrical discharge machining with manganese powder mixed in the dielectric, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 50, 5-8, pp. 625-633, SEP 2010.
  74. S. Assarzadeh, M. Ghoreishi, M. Shariyyat: Response Surface Methodology Approach to Process Modeling and Optimization of Powder Mixed Electrical Discharge Machining (PMEDM), Proceedings of 16th International Symposium on Electromachining (ISEM XVI), Shanghai, PEOPLES R CHINA, pp. 181-186, APR 2010
  75. Wang Dongguo: Simulation of Particles Movement in Powder Mixed EDM, Advanced Materials Research (MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, International Conference on Manufacturing Science and Engineering (ICMSE 2009), Zhuhai, CHINA, DEC. 2009.),97-101, pp. 4150-4153, DOI: 10.4028/www.scientific.net/AMR.97-101.4150, 2010.
  76. Kumar S, Singh R, Singh TP, et al.: Comparison of material transfer in electrical discharge machining of AISI H13 die steel, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 223, 7, pp. 1733-1740, JUL 2009.
  77. Kumar S, Singh R, Singh TP, et al.: Surface modification by electrical discharge machining: A review, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 209, 8, pp. 3675-3687, APR 21 2009.
  78. Kung KY, Horng JT, Chiang KT: Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 40, 1-2, pp. 95-104, JAN 2009
  79. Tzeng YF: Development of a flexible high-speed EDM technology with geometrical transform optimization, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 203, 1-3, pp. 355-364, JUL 18 2008
  80. Kansal HK, Singh S, Kumar P: Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method, MATHEMATICAL AND COMPUTER MODELLING, 47, 11-12, pp. 1217-1237,JUN 2008
  81. Hu Fuqiang, Zhang Hong, Zhao Wansheng et al.: Surface properties of 3000 degrees C high melting point material by powder mixed EDM, KEY ENGINEERING MATERIALS (ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 9th Conference on Machining and Advanced Manufacturing Technology in China, Harbin, CHINA), 375-376, pp. 143-147, 2008.
  82. Y. G. Wang, F. L. Zhao: Simulation of particles' activity in discharge channel of PMEDM, APPLIED MECHANICS AND MATERIALS, 10-12, E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY, pp. 297-302, 2008
  83. Ho SK, Aspinwall DK, Voice W: Use of powder metallurgy (PM) compacted electrodes for electrical discharge surface alloying/modification of Ti-6Al-4V alloy, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 191, 1-3, Sp. Iss. SI, pp. 123-126, AUG. 2007
  84. Abbas NM, Solomon DG, Bahari MF: A review on current research trends in electrical discharge machining (EDM), INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 47, 7-8, pp. 1214-1228, JUN 2007
  85. Kansal HK, Singh S, Kumar P: Technology and research developments in powder mixed electric discharge machining (PMEDM), JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 184 (1-3): 32-41 APR 12 2007.
  86. Tzeng YF, Chen FC: Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach, MATERIALS & DESIGN 28 (4): 1159-1168 2007
  87. Singh S., Maheshwari S.: Machinability of Al(2)O(3)p/6061Al composite by hybrid process of electrical discharge machining using dielectric fluid suspended with silicon carbide powder, Proceedings of 15th International Symposium on Electromachining, Pittsburgh, PA, pp. 475-480, APR. 2007.
  88. Hu F. Q., Zhang H., Wang Z. L. et al.: Surface properties of powder mixed EDM of a Ta-W alloy material, Proceedings of 15th International Symposium on Electromachining, Pittsburgh, PA, pp. 29-33, APR. 2007.
  89. Zahiruddin M. Z., Rahim E. A., Hasan S. et al.: Effect of electrical parameters on the PMD-EDM performances of titanium alloy, Proceedings of 8th International Conference on Progress of Machining Technology, Matsue, JAPAN, pp. 245-248, NOV. 2006.
  90. Cogun C, Ozerkan B, Karacay T: An experimental investigation on the effect of powder mixed dielectric on machining performance in electric discharge machining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 220 (7): 1035-1050 JUL 2006
  91. Kansal HK, Singh S, Kumar P: Parametric optimization of powder mixed electrical discharge machining by response surface methodology, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 169 (3): 427-436 DEC 1 2005
  92. Yang SL, Lu XQ, Zou ZD et al.: Microstructure and abrasive mechanism of surfacing welding based on TiC-VC particle, Proceedings of 14th Congress of the International-Federation-for-Heat-Treatment-and-Surface-Engineering, Shanghai, CHINA, pp.977-980, OCT. 2004. 
  93. Lee HG, Simao J, Aspinwall DK, et al.: Electrical discharge surface alloying, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 149 (1-3): 334-340 JUN 10 2004
  94. Bai CY, Koo CH, Wang CC: Electrical discharge surface alloying of superalloy Haynes 230 with aluminum and molybdenum , MATERIALS TRANSACTIONS 45 (9): 2878-2885 SEP 2004
  95. Aspinwall DK, Dewes RC, Lee HG, et al., Electrical discharge surface alloying of Ti and Fe workpiece materials using refractory powder compact electrodes and Cu wire, CIRP ANN-MANUF TECHN 52 (1): 151-156 2003 
  96. Lee HG, Dewes RC, Aspinwall DK: Electrical discharge surface alloying of Ti-6AI-4V using partially sintered tool electrodes, ADVANCES IN MANUFACTURING TECHNOLOGY - XVII (1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR), GLASGOW, SCOTLAND), pp. 55-60, SEP. 2003.
  97. Simao J, Lee HG, Aspinwall DK, Dewes RC, Aspinwall EM: Workpiece surface modification using electrical discharge machining, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43 (2): 121-128 JAN 2003

Go back to paper list

by Katsushi Furutani