Proceedings 1997-1998

As of

1998 | 1997 |

 


<1998>

  1. Katsushi Furutani, Mitsunori Urushibata, Naotake Mohri: Condition Monitoring of Stacked Piezoelectric Actuator Using Induced Charge, Proceedings of 13th Annual Meeting of American Society for Precision Engineering, St. Louis, Missouri, USA, 18, pp. 275-278 (1998)
  2. Hideki Takezawa, Hideaki Yoshida, Kenji Iwamoto, Katsushi Furutani, Naotake Mohri, Toshio Sata: On-the-machine Measurement by Calibration with Spheres - Observation of Spheres of Tool and Electrode -, Proceedings of 4th Japan-France Congress and 2nd Asia-Europe Congress on Mechatronics, Kitakyushu, Japan, 2, pp. 762-766 (1998)
  3. Hideki Takezawa, Katsushi Furutani, Naotake Mohri: Precision Machining by Feedback of Shape Data, Proceedings of 4th Japan-France Congress and 2nd Asia-Europe Congress on Mechatronics, Kitakyushu, Japan, 2, pp. 732-736 (1998)
  4. Katsushi Furutani, Masumu Sato, Toshiya Takasu, Toshio Enami, Naotake Mohri: Basic Performance of Differential Friction Drive Mechanism, Proceedings of 4th Japan-France Congress and 2nd Asia-Europe Congress on Mechatronics, Kitakyushu, Japan, 1, pp. 102-107 (1998)
  5. Katsushi Furutani, Mitsunori Urushibata, Toshio Enami, Naotake Mohri: A Linear Drive Mechanism for Dot-matrix Electrical Discharge Machining, Proceedings of 4th Japan-France Congress and 2nd Asia-Europe Congress on Mechatronics, Kitakyushu, Japan, 1, pp. 96-101   (1998)
  6. Hisashi Yamada, Naotake Mohri, Katsushi Furutani, Tatsuo Narikiyo: Mathematical Model of Wire Electrical Discharge Machining System, Proceedings of 14th International Conference on Computer Aided Production Engineering, Tokyo, Japan, pp. 295-300 (1998)
  7. Naotake Mohri, Kazutaka Fujii, Katsushi Furutani, Hideki Takezawa, Toshio Sata: Material Accretion by Electrical Discharge machining with Thin Electrodes, Proceedings of International Seminar on Improving Machine Tool Performance, San Sebastian, Spain, 2, pp. 829-837 (1998)
  8. Katsushi Furutani, Naotake Mohri, Toshiro Higuchi: Comparison of Electrode Feeding Devices for Micro Hole Electrical Discharge Machining, Proceedings of 3rd International Conference on Advanced Mechatronics, Okayama, Japan, 1, pp. 336-341 (1998)
  9. Katsushi Furutani, Yuji Kenjo, Naotake Mohri: Electrical Discharge Machining by Local Machining Station Method -- Improvement of Positioning Accuracy for Machining on Large Workpiece --, Proceedings of 1998 Japan-USA Symposium on Flexible Automation, Ohtsu, Shiga, Japan, II, pp. 833-840 (1998)
  10. Katsushi Furutani, Mitsunori Urushibata, Naotake Mohri: Improvement of Control Method for Piezoelectric Actuator by Combining Induced Charge Feedback with Inverse Transfer Function Compensation, Proceedins of the 1998 IEEE International Conference on Robotics and Automation, Katholieke Universiteit Leuven, Leuven, Belgium, 2, pp. 1504-1509 (1998)Piezo control in icra98 (484 kB) [Citation: 2]
  11. Yasushi Fukuzawa, Hidetaka Katougi, Naotake Mohri, Katsushi Furutani, Takayuki Tani: Machining Properties of Insulating Ceramics with an Electric Dischage Machinig - Machining of the Oxide Ceramics -, Proceedings of the 12th International Symposium for Electromachining (ISEM 12), Aachen, Germany, pp. 445-453 (1998)
  12. Tae-min Shin, Naotake Mohri, Hisashi Yamada, Mamoru Kosuge, Katsushi Furutani, Yasushi Fukuzawa: Machining Phenomena in EDM of Insulating Ceramics - Effect of Condenser Electrical Discharge -, Proceedings of the 12th International Symposium for Electromachining (ISEM 12), Aachen, Germany, pp. 437-444 (1998)
  13. Katsushi Furutani, Naotake Mohri, Toshiro Higuchi: Displacement Sensor for Small Linear Drive in Local Machining Station, Proceedings of 2nd International Symposium on Linear Drives for Industry Applications, Tokyo, Japan, pp. 147-150 (1998)

Go to top

 


<1997>

  1. Katsushi Furutani, Kazuhiro Shibatani, Naoki Itoh, Naotake Mohri: An End Effector Using Parallel Mechanism for Scanning Electrical Discharge Machining, Proceedings of 12th Annual Meeting of American Society for Precision Engineering, Norfolk, Virginia, USA, pp. 357-360 (1997). [Citation: 1]
  2. Kohsaku Asamoto, Katsushi Furutani, Naotake Mohri: A Basic Study on Nanometer Cutting of Brittle Materials, Proceedings of 12th Annual Meeting of American Society for Precision Engineering, Norfolk, Virginia, USA, pp. 466-469 (1997).
  3. Hisashi Yamada, Naotake Mohri, Katsushi Furutani, Takuji Magara: Transient Response of Wire Electrode in Wire Electrical Discharge Machining, Proceedings of 12th Annual Meeting of American Society for Precision Engineering, Norfolk, Virginia, USA, pp. 307-310 (1997).
  4. Katsushi Furutani, Mitsunori Urushibata, Naotake Mohri, Displacement Control of Piezoelectric Element by Feedback of Induced Charge, Proceedings of 5th Biennial Nanotechnology Symposium, Noda, Chiba, Japan, pp. 26-27 (1997)
  5. Katsushi Furutani, Naotake Mohri, Toshiro Higuchi: Self-running Type Electrical Discharge Machine Using Impact Drive Mechanism, Proceedings of IEEE/ASME 1st International Conference on Advanced Intelligent Mechatronics (AIM'97), Tokyo, Japan, p. 88 (1997) (CD-ROM)
  6. Kenji Iwamoto, Katsushi Furutani, Naotake Mohri: On-the-machine 3D Measurement and Its Evaluation by Calibration System with Geometrical Solids, Proceedings of XIV IMEKO World Congress, VIII, Topic 14, Tampere, Finland, pp. 184-189 (1997)
  7. Katsushi Furutani, Toshio Enami, Naotake Mohri: Dot-matrix Electrical Discharge Machining for Shaping Fine Structure, Proceedings of IEEE the 10th Annual International Workshop on Micro Electro Mechanical Systems, Nagoya, Japan, pp. 180-185 (1997) [Citation: 3]

Go to top

 


論文リストへ

 

Last modified on 10/29/2002 at 17:20:16 by Katsushi Furutani