Citation Report

As of

Paper

Katsushi Furutani, Hiromichi Sato, Masayuki Suzuki: Influence of electrical conditions on performance of electircal discharge machining with powder suspended in working oil for titanium carbide deposition process, International Journal of Advanced Manufacturing Technology, 40, 11-12, pp. 1093-1101, DOI: 10.1007/s00170-008-1420-x (2009)

Number of citation: 31

  1. H. Yasar, B. Ekmekci: The effect of micro and nano hydroxyapatite powder on biocompatibility and surface integrity of Ti6Al4V (ELI) in powder mixed electrical discharge machining, SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 9, 1, 015015, MAR 2021.
  2. Md. Al-Amin, A. M. Abdul-Rani, M. Danish et al.: Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 66, 531-549, NOV 2020.
  3. A. Abdudeen, Q. J. E. Abu, A. Kareem et al.: Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM, MICROMACHINES, 11, 8, 754, AUG 2020.
  4. Md. Al-Amin, A. M. A. Rani, A. A. A. Aliyu et al.: Powder mixed-EDM for potential biomedical applications: A critical review, MATERIALS AND MANUFACTURING PROCESSES, 35, 16, 1789-8111, DEC 9 2020.
  5. Md. Al-Amin, A. A. A. Rani, A. A. A. Aliyu et al.: Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review, MATERIALS AND MANUFACTURING PROCESSES, 35, 11, pp. 1157-1180, AUG 17 2020.
  6. S. L. Li, Y. J. Mai, M. Y. Huang et al.: Anti-wear hierarchical TiC enhanced cermet coating obtained via electrical discharge coating using a reduced graphene oxide nanosheets mixed dielectric, CERAMICS INTERNATIONAL, 46, 8, pp. 11933-11942, B, JUN 1 2020.
  7. Toan Duc Nguyen, Phan Huu Nguyen, Long Tien Banh: Die steel surface layer quality improvement in titanium -powder mixed die sinking electrical discharge machining, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100, 9-12, pp. 2637-2651, FEB 2019
  8. Abdul Azeez Abdu Aliyu, Ahmad Majdi Abdul-Rani, Turnad Lenggo Ginta et al.: Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO3) on Zr-Cu-Ni-Ti-Be for orthopedic application, MATERIALS AND MANUFACTURING PROCESSES, 33, 16, pp. 1734-1744, DEC 2018
  9. Gill, Amoljit Singh; Kumar, Sanjeev: Investigation of Micro-Hardness in Electrical Discharge Alloying of En31 Tool Steel with Cu-W Powder Metallurgy Electrode, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 43, 3, pp. 1499-1510, MAR 2018
  10. Sujoy Chakraborty, Siddhartha Kar, Dey Vidyut et al.: THE PHENOMENON OF SURFACE MODIFICATION BY ELECTRO-DISCHARGE COATING PROCESS: A REVIEW, SURFACE REVIEW AND LETTERS, 25, 1, 1830003, JAN 2018
  11. Bhaskar Chandra Kandpal, Jatinder Kumar, Hari Singh: Optimization of electrical discharge machining AA6061/10 %Al2O3 composite using Taguchi optimization technique, MATERIALS TODAY-PROCEEDINGS, 5, 9, Pt. 3, pp. 18946-18955, 2018
  12. Maximilian Holsten, Philip Koshy, Andreas Klink et al.: Anomalous influence of polarity in sink EDM of titanium alloys, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 67, 1, pp. 221-224, 2018
  13. Chakraborty, Sujoy; Kar, Siddhartha; Dey, Vidyut; et al.: THE PHENOMENON OF SURFACE MODIFICATION BY ELECTRO-DISCHARGE COATING PROCESS: A REVIEW, SURFACE REVIEW AND LETTERS, 25, 1, 1830003, JAN 2018
  14. Talla, Gangadharudu; Gangopadhayay, S.; Biswas, C. K.: State of the art in powder-mixed electric discharge machining: A review, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 231, 14, SI, pp. 2511-2526, DEC 2017
  15. Samer J. Algodi, James W. Murray, Michael W. Fay et al.: Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel, SURFACE & COATINGS TECHNOLOGY, 307, Pt. A, pp. 639-649, DEC 15 2016
  16. Tien Long Banh, Nguyen Huu Phan, Ngo Cuong et al.: Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi's method, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 87, 5-8, pp. 1929-1939, NOV 2016
  17. Z. J. Xie, Y. J. Mai, W. Q. Lian et al.: Titanium carbide coating with enhanced tribological properties obtained by EDC using partially sintered titanium electrodes and graphite powder mixed dielectric, SURFACE & COATINGS TECHNOLOGY, 300, pp. 50-57, AUG 25 2016
  18. Wang, Xiaolong; Liu, Yonghong; Zhang, Yanzhen; et al.: Characteristics of plasma channel in powder-mixed EDM based on monopulse discharge, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 82, 5-8, pp. 1063-1069, FEB 2016.
  19. Ryota Toshimitsu, Akira Okada, Ryoji Kitada et al.: Improvement in Surface Characteristics by EDM with Chromium Powder Mixed Fluid, Procedia CIRP, 42, pp. 231-235, 2016
  20. Gaurav Kumar, J. S. Tiwana, Ashish Singla: Optimization of the machining parameters for EDM wire cutting of Tungsten Carbide, MATEC Web of Conferences, 57, UNSP 03006, 2016
  21. S. J. Algodi, J. W. Murray, A. T. Clare et al.: Characterisation of TiC layers deposited using an electrical discharge coating process, Journal of Physics Conference Series, 644, Electron Microscopy and Analysis Group Conference (EMAG), Manchester, ENGLAND, 012008, JUL 2015
  22. Singh, Anoop Kumar; Kumar, Sanjeev; Singh, V. P.: Effect of the addition of conductive powder in dielectric on the surface properties of superalloy Super Co 605 by EDM process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 77, 1-4, pp. 99-106, MAR 2015
  23. Bhattacharya, Anirban; Batish, Ajay; Bhatt, Geeta: Material transfer mechanism during magnetic field-assisted electric discharge machining of AISI D2, D3 and H13 die steel, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 229, 1, pp. 62-74, JAN 2015
  24. Arun, Ilangovan; Vaishnavi, P.; Duraiselvam, Muthukannan; et al.: Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 105, 6, pp. 544-551, JUN 2014
  25. Shrivastava, Pankaj K.; Dubey, Avanish K.: Electrical discharge machining-based hybrid machining processes: A review, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 228, 6, pp.799-825, JUN 2014
  26. Yang Shen, Yonghong Liu, Yanzhen Zhang et al.: Determining the energy distribution during electric discharge machining of Ti-6Al-4V, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 70, 1-4, pp. 11-17, JAN 2014
  27. Rajiv Kumar Garg, Kuldeep Ojha: Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Minimum Surface Roughness and Maximum MRR, MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, (Advanced Materials Research), 383-390, pp. 3202-3206, 2012.
  28. Bhattacharya A., Batish A., Singh G. et al.: Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 61, 5-8, pp. 537-548, DOI: 10.1007/s00170-011-3716-5, JUL 2012.
  29. Batish A., Bhattacharya A., Singla V. K. et al.: Study of Material Transfer Mechanism in Die Steels Using Powder Mixed Electric Discharge Machining, MATERIALS AND MANUFACTURING PROCESSES, 27, 4, pp. 449-456, DOI: 10.1080/10426914.2011.585498, 2012.
  30. Tan P. C., Yeo S. H.: Investigation of recast layers generated by a powder-mixed dielectric micro electrical discharge machining process, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 225, B7, pp. 1051-1062, DOI: 10.1177/2041297510393645, JUL. 2011.
  31. Hongbiao Han, Yupeng Guo: Study on Electrospark Depositing & Welding Power Supply, Advanced Materials Research, 314-316, ADVANCED MANUFACTURING TECHNOLOGY, pp. 165-170, 2011

Go back to paper list

by Katsushi Furutani