Citation Report

As of

Paper

Katsushi Furutani, Michio Suzuki, Ryusei Kudoh: Nanometre-cutting machine using a Stewart-platform parallel mechanism, Measurement Science & Technology, 15, 2, pp. 467-474 (2004).

Number of citation: 17

  1. S. Kang, M. G. Lee, Y. M. Choi: Six Degrees-of-Freedom Direct-Driven Nanopositioning Stage Using Crab-Leg Flexures,
    IEEE-ASME TRANSACTIONS ON MECHATRONICS, 25, 2, pp. ‏ 513-525 APR 2020.
  2. J. J. Hernandez-Gomez, I. Medina, C. R. Torres-San Miguel et al.: Error Assessment Model for the Inverse Kinematics Problem for Stewart Parallel Mechanisms for Accurate Aerospace Optical Linkage, MATHEMATICAL PROBLEMS IN ENGINEERING, 9592623, 2018
  3. Conte, J.; Majarena, A. C.; Aguado, S.; et al.: Calibration strategies of laser trackers based on network measurements, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 83, 5-8, pp. 1161-1170, MAR 2016.
  4. Torii A., Banno M., Ueda A. et al.: A Small-Size Self-Propelled Stewart Platform, ELECTRICAL ENGINEERING IN JAPAN, 181, 2, pp. 37-46, DOI: 10.1002/eej.21261, NOV 15 2012.
  5. Majarena A. C., Santolaria J., Samper, D. et al.: Modelling and calibration of parallel mechanisms using linear optical sensors and a coordinate measuring machine, MEASUREMENT SCIENCE & TECHNOLOGY, 22, 10, 105101, DOI: 10.1088/0957-0233/22/10/105101, OCT 2011.
  6. Majarena A. C.; Santolaria J.; Samper D.; et al.: Modelling and calibration of parallel mechanisms using linear optical sensors and a coordinate measuring machine, MEASUREMENT SCIENCE & TECHNOLOGY, 22, 10, 105101, DOI: 10.1088/0957-0233/22/10/105101, OCT 2011.
  7. Mao DF, Duan ML, Wang Y, et al.: Model test investigation on an innovative lifting system for deepwater riser installation, PETROLEUM SCIENCE, 7, 4, pp. 547-554, DEC 2010.
  8. Liu Xinyu: EXPERIMENTAL INVESTIGATION OF MICRO-MILLING ACCURACY USING ON-MACHINE MEASUREMENT SYSTEM, PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2010, 2, pp. 371-379, OCT. 2010.
  9. C. Collette, S. Janssens, K. Artoos et al.: CLIC quadrupole stabilization and nano-positioning, Proceedings of International Conference on Noise and Vibration Engineering (ISMA)/Conference of USD, Leuven, BELGIUM, pp. 4453-4462, SEP 2010
  10. Collette C, Artoos K, Kuzmin A, et al.: Active quadrupole stabilization for future linear particle colliders, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 621, 1-3, pp. 71-78, SEP 2010.
  11. Lan CC, Wang JH, Fan CH: Optimal design of rotary manipulators using shape memory alloy wire actuated flexures, SENSORS AND ACTUATORS A-PHYSICAL, 153, 2, pp. 258-266, AUG 3 2009
  12. Wang Jhe-Hong, Fan Chen-Hsien, Lan Chao-Chieh: A Two-Way Flexural Rotation Manipulator Using Opposing Shape Memory Alloy Wires, Proceedings of 2009 IEEE ASME International Conference on Advanced Intelligent Mechatronics, pp. 6-11, Jul. 2009.
  13. Wang Jhe-Hong, Fan Chen-Hsien, Lan Chao-Chieh: A Compact Rotational Manipulator Using Shape Memory Alloy Wire Actuated Flexures, Proceedings of 2009 IEEE International Conference on Robotics and Automation, Kobe, JAPAN, pp. 325-330, MAY 2009.
  14. Shi Jiashun, Mi Jintai, Wang Jinsheng et al.: Investigation on the Key Technologies of Micro Machine Tool and Prototype Development, Proceedings of 1st International Conference Intelligent Robotics and Applications, 5315, Part ii, pp. 240-249, Wuhan, CHINA, OCT. 2008.
  15. Han P., Wang T., Wang D. H.: Modeling and Control of a Stewart Platform Based Six-Axis Hybrid Vibration Isolation System, Proceedings of 7th World Congress on Intelligent Control and Automation, Chongqing, CHINA, pp. 1613-1618, DOI: 10.1109/WCICA.2008.4593160, JUN. 2008.
  16. Yano T.: Multi dimensional drive system and their applications, Proceedings of International Symposium on Power Electronics , Electrical Drives, Automation and Motion, Taormina, ITALY, pp. 384-389, MAY 2006.
  17. Marcinkevicius AH: Analysis of work accuracy dependencies on design of a device for control of workpiece dimensions and compliance at machining, SOLID STATE PHENOMENA 113: 471-476 2006 

Go back to paper list

by Katsushi Furutani