Papers (1991-1998)

As of

1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991

<1998>

  1. Naotake Mohri, Hisashi Yamada, Katsushi Furutani, Tatsuo Narikiyo, Takuji Magara: System Identification of Wire Electrical Discharge Machining, Annals of CIRP, 47, 1, pp. 173-176 (1998)
  2. Katsushi Furutani, Kazuhiro Shibatani, Naoki Itoh, Naotake Mohri: A Parallel link End Effector for Scanning Electrical Discharge Machining Process, Precision Engineering, 22, 3, pp. 131-140 (1998)
  3. Katsushi Furutani, Mitsusnori Urushibata, Naotake Mohri: Displacement Control of Piezoelectric Element by Feedback of Induced Charge, Nanotechnology, 9, 2, pp. 93-98 (1998)
  4. Katsushi Furutani, Toshiro Higuchi, Yutaka Yamagata, Naotake Mohri: Effect of Lubrication on Impact Drive Mechanism, Precision Engineering, 22, 2, pp. 78-86 (1998)

Go to Top

<1997>

  1. Katsushi Furutani, Toshio Enami, Naotake Mohri: Three-dimensional Shaping by Dot-matrix Electrical Discharge Machining, Precision Engineering, 21, 2-3, pp. 65-71 (1997)
  2. Naotake Mohri, Katsushi Furutani, Kazuhisa Shirai, Toshio Enami: Forced Discharge Dispersion by Dot-Matrix Method, Annals of CIRP, 46, 1, pp. 139-142 (1997)
  3. Katsushi Furutani, Naotake Mohri, Nagao Saito, Hideki Takezawa, Toshiyuki Shin, Masatake Higashi: Simultaneous Finishing a Pair of Dies by Electrical Discharge Grinding, Rapid Product Development (Proceedings of the 8th International Conference on Production Engineering, 8th ICPE, Sapporo, Japan), pp. 263-272 (1997)
  4. Hisashi Yamada, Naotake Mohri, Nagao Saito, Takuji Magara, Katsushi Furutani: Modal Analysis of Wire Electrode Vibration in Wire-EDM, International Journal of Electrical Machining, 2, pp. 19-24 (1997)

Go to Top

<1996>

  1. Naotake Mohri, Yasushi Fukuzawa, Takayuki Tani, Nagao Saito, Katsushi Furutani: Assisting Electrode Method for Machining Insulating Ceramics, Annals of CIRP, 45, 1, pp. 201-204 (1996)

Go to Top

<1995>

Go to Top

<1994>

Go to Top

<1993>

  1. Toshiro Higuchi, Katsushi Furutani, Yutaka Yamagata, Ken-ich Kudoh, Masaru Ogawa: Improvement of Velocity of Impact Drive Mechanism by Controlling Friction, Japanese Journal of Advanced Automation Technology, 5, 2, pp. 71-76 (1993)
  2. Toshiro Higuchi, Katsushi Furutani, Yutaka Yamagata, Kohzo Takeda: Development of Electro-Discharge Machine with Multiple Electrodes, Japanese Journal of Advanced Automation Technology, 5, 2, pp. 77-82 (1993)

Go to Top

<1992>

Go to Top

<1991>

  1. Toshiro Higuchi, Katsushi Furutani, Yutaka Yamagata, Kohzo Takeda: Development of Pocket-Size Electro-Discharge Machine, Annals of CIRP, 40, 1, pp. 203-206 (1991)

Go to Top

Go to top page of paper list

by Katsushi Furutani