Papers (1999-2003)

As of

2003 | 2002 | 2001 | 2000 | 1999

<2003>

  1. Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura: Pressure-based in-process measurement by the null method for automatic compensation of wheel wear during surface grinding, Proceedings of the Institution of Mechanical Engineers Part B; Journal of Engineering Manufacture, 217, B2, pp. 153-159 (2003)
  2. Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura: Automatic compensation for grinding wheel wear by pressure based-in process measurement in wet grinding, Precision Engineering, 27, 1, pp. 9-13 (2003)

Go to Top

<2002>

  1. Katsushi Furutani, Noriyuki Ohguro, Nguyen Trong Hieu, Takashi Nakamura: In-process measurement of topography change of grinding wheel by using hydrodynamic pressure, International Journal of Machine Tools and Manufacture, 42, 13, pp. 1447-1453 (2002).

Go to Top

<2001>

  1. Katsushi Furutani, Motoya Furuichi, Naotake Mohri: Coarse motion of `seal mechanism' with three degrees of freedom by using difference of frictional force, Measurement Science and Technology, 12, 12, pp. 2147-2153 (2001)pdficonsmall.gif (153 バイト)
  2. Katsushi Furutani, Akinori Saneto, Hideki Takezawa, Naotake Mohri, Hidetaka Miyake: Accretion of Titanium Carbide by Electrical Discharge Machining with Powder Suspended in Working Fluid, Precision Engineering, 25, 2, pp. 138-144 (2001)

Go to Top

<2000>

  1. Naotake Mohri, Hideki Takezawa, Katsushi Furutani, Yoshiro Ito, Toshio Sata: A New Process of Additive and Removal Machining by EDM with a Thin Electrode, Annals of CIRP, 49, 1, pp. 123-126 (2000)

Go to Top

<1999>

  1. Hideki Takezawa, Katsushi Furutani, Naotake Mohri: Precision Machining by Feedback of Shape Data (1st Report) - The Basic Concept and Examples of Corrective Machining -, International Journal of The Japan Society for Precision Engineering, 33, 3, pp. 209-214 (1999)
  2. Katsushi Furutani, Kenji Iwamoto, Hideki Takezawa, Naotake Mohri: Multiple Degrees-of-Freedom Arm with Passive Joints for On-the-Machine Measurement System by Calibrating with Geometrical Solids, Precision Engineering, 23, 2, pp. 133-125 (1999)

Go to Top

Go to top page of paper list

by Katsushi Furutani