As of
2014 | 2013 | 2012 | 2011
- Katsushi Furutani, Atsushi Sakata: Motion Accuracy of Piezoelectric actuators
in Continuous Path Control by Driving with Current Pulses, Proceedings
of 6th International Conference on Positioning Technology, Kitakyushu,
Japan, pp. 268-271 (2014)
- Katsushi Furutani, Ryota Inukai, Takayoshi Takano, Tatsuaki Okada, Kazuto
Saiki, Hiroyuki Ohue: Measurement of Saw Wire Temperature during Cutting
of Rock in Vacuum, Proceedings of 29th Annual Meeting of American Society
for Precision Engineering, Boston, Massachusetts, USA, pp. 508-511 (2014)
- Katsushi Furutani, Yosuke Kawabata, Tatsuaki Okada, Kazuto Saiki, Hiroyuki
Ohue: Measurement of Cutting Power during Wire-Sawing of Rock in Vacuum,
Proceedings of 65th International Astronautical Congress, Toronto, Ontario,
Canada, IAC-14-A3.2D.28, pp. 1-5 (2014)
- J. Haruyama, I. Kawano, T. Kubota, M. Otsuki, H. Kato, T. Nishibori, T.
Iwata, Y. Yamamoto, Y. Ishihara, A. Nagamatsu, K. Shimada, T. Hasenaka,
T. Morota, M. N. Nishino, K. Hashizume, K. Saiki, M. Shirao, G. Komatsu,
N. Hasebe, H. Shimizu, H. Miyamoto, K. Kobayashi, S. Yokobori, T. Michikami,
S. Yamamoto, Y. Yokota, H. Arisumi, G. Ishigami, K. Furutani, Y. Michikawa
and UZUME Team: Unprecedented Zipangu Underworld of the Moon, European
Planetary Science Congress 2014 Abstracts, Cascais, Portugal, Vol. 9, EPSC2014-465-1
(2014)
- Katsushi Furutani, Daisuke Hiraoka: Condition Monitoring in Concurrent
Micro-hole Electrical Discharge Machining with Electrode Feeding Devices
Employing AZARASHI (Seal) Mechanism, Procedia CIRP, (Proceedings of 6th
CIRP Conference on High Performance Cutting, Berkeley, California, USA),
14, pp. 424-429 (2014)
- Katsushi Furutani, Norimichi Yoshida: Conditions for Bending of Thin Metal
Sheet by Thermal Strain in Electrical Discharge Machining, Procedia CIRP,
17, pp. 686-691 (Proceedings of 47th CIRP Conference on Manufacturing Systems,
Windsor, Ontario, Canada, pp. 125-130) (2014)
Go to top
- Katsushi Furutani, Atsushi Sakata: Reduction of Residual Vibration of Piezoelectric
Actuator Driven by Current Pulse, Proceedings of 28th Annual Meeting of
American Society for Precision Engineering, St. Paul, Minnesota, USA, 56,
pp. 50-53 (2013).
- Katsushi Furutani, Kazuyuki Arai, Shunsuke Kojima: Machining of Nonconductive
Thin Rod by Using Lathe-type Electro-chemical Discharge Machine, Proceedings
of 16th International Conference on Advances in Materials and Processing
Technologies (AMPT2013), Taipei, Taiwan, 64, p. 8 (2013).
- Katsushi Furutani, Atsushi Sakata: Mass Measurement of Grasped Object with
Tweezers Employing by Bimorph Piezoelectric Actuators, Abstract Book of
16th International Symposium on Applied Electromagnetics and Mechanics,
Quebec City, Quebec, Canada, pp. 27-28 (2013).
Go to top
- Katsushi Furutani, Masataka Ono: Development of Transfer Device with Damper
for Suppression of Reflected Wave, Proceedings of 5th International Conference
on Positioning Technology, pp. 27-30 (2012)
- Katsushi Furutani, Masataka Ono: Mechanism of Driving Force Generation
in Two-Dimensional Non-Contact Transfer Method by Near-Field Ultrasonic
Levitation, Proceedings of 27th Annual Meeting of American Society for
Precision Engineering, San Diego, California, USA, pp. 198-201 (2012).
- Katsushi Furutani, Eiji Ikeda, Tatsuaki Okada, Kazuto Saiki, Hiroyuki Ohue:
Prototype Design of Wire-sawing Machine for Preliminary Experiments to
Lunar and Planetary Exploration, Proceedings of 15th International Conference
on Advances in Materials and Processing Technologies, Wollongong, NSW,
Australia, 11151, pp. 1-6 (2012).
- Katsushi Furutani, Hisashi Kamiishi, Yasuo Murase, Takashi Kubota, Makiko
Ohtake, Kazuto Saiki, Tatsuaki Okada, Hisashi Otake, Chikatoshi Honda,
Hirohisa Kurosaki, Takamitsu Sugihara, Tomokatsu Morota: A Prototype of
Percussive Rock Surface Crusher Using Solenoid for Lunar and Planetary
Exploration, Proceedings of Inernational Symposium on Artificial Intelligence,
Robotics and Automation in Space (i-SAIRAS 2012), Turin, Italy, P.18, pp.
1-8 (2012).
- Katsushi Furutani, Eiji Kagami, Makiko Ohtake, Chikatoshi Honda, Masatsugu
Ohtsuki, Takashi Kubota, Tatsuaki Okada: Machining Performance of Rock
Surface Shaver Driven with Piezoelectric Actuator for Space Exploration,
Proceedings of 12th International Conference of European Society for Precision
Engineering and Nanotechnology, Stockholm, Sweden, 2, pp. 481-484 (2012).
Go to top
- Katsushi Furutani, Shoudai Fukunaga, Tatsuaki Okada, Kazuto Saiki, Hiroyuki
Ohue: Effect of Vacuum on Wire-sawing as Preliminary Experiment to Lunar
Exploration, Proceedings of 2011 Annual Meeting of American Society for
Precision Engineering, Denver, Colorado, USA, pp. 349-352 (2011).
- Katsushi Furutani, Masataka Ono: Fundamental experiments of transfer device
using ultrasonic levitation, Proceedings of 14th European Conference on
Power Electronics and Applications, Birmingham, UK, 0090, pp. 1-10 (2011).
- Meifal Rusli, Katsushi Furutani: Performance of Micro-hole Drilling by
Ultrasonic-assisted Electro-Chemical Discharge Machining, Proceedings of
14th International Conference on Advances in Materials and Processing Technologies,
Istanbul, Turkey, OPO009, pp. 1-6 (2011).
- Katsushi Furutani, Kazuyuki Arai: Measurement of Machining Force in Lathe
Type Electro-chemical Discharge Machine, Proceedings of 11th euspen International
Conference, Cernobbio, Italy, pp. 220-223 (2011).
Go to top
論文リストへ
by Katsushi
Furutani